Our products

1. Hot-rolled bars and wires (cooper) of rectangular cross-section.
   • Dimensions: thickness 3 ÷ 8 mm
   • width 8 ÷ 30 mm
   • Cooper in coils weighing 80 ÷ 200 kg secured with tape, with an inside diameter of 400, 500 or 600 mm and an outside diameter of max. 1250 mm or loose coils weighing max. 500 kg and an inside diameter of approx. 700 mm
   • Bars in sections of 2 ÷ 6 m in length
2. Hot-rolled bars and wires with special cross-sections (square, trapezoidal, triangular, oval and other cross-sections according to customer requirements).
   • Maximum cross-section 150 mm².
   • Wire in loose coils with a maximum weight of 500 kg and an internal diameter of approx. 700 mm
   • Bars in lengths of 2 ÷ 6 m
3. Drawn bars of cross-section:
   • flat, width 6 ÷ 20 mm, thickness 3 ÷ 8 mm, tolerance h11 acc. to PN-EN 10278; length 2 ÷ 6 m
   • square, 6 ÷ 14 mm, tolerance h11 acc. to PN-EN 10278; length 2 ÷ 6 m
   • round, ø 8 ÷ 20 mm, tolerance h9 ÷ h11 acc. to PN-EN 10278; length 2 ÷ 6 m
   • hexagonal, 6 ÷ 14 mm, tolerance h11 acc. to PN-EN 10278; length 2 ÷ 6 m
   • other cross-section shapes depending on customer's needs, e.g. trapezoid, semicircle, oval, triangle, etc. Max. cross-section area is 120 mm².

All of the above products can be made as:

• raw
• softened
• normalised

Hot-rolled and drawn products can be made in various steel grades and in particular:

• general purpose
• increased strength
• for carburising
• for tempering
• springs